Differences

This shows you the differences between two versions of the page.

--- iaas:createvm [2020/05/26 09:35] – created Sylvain Huwiler
+++ iaas:createvm [2020/05/26 11:13] (current) – Sylvain Huwiler
@@ Line 1: / Line 1: @@
+**On the Dashboard page click on the + button**
 {{:iaas:pasted:20200526-113214.png}}
+**Select the template for the VM.
+For the Linux make sure you have the [[iaas:firstlogin|ssh public key configured on yout account]]**
 {{:iaas:pasted:20200526-113221.png}}
+**Enter a name for the vm
+**
 {{:iaas:pasted:20200526-113228.png}}
+**Select Hardware resources. If you don't know what to allocate, start with low resources (default values) you can still upgrade afterwards**
 {{:iaas:pasted:20200526-113235.png}}
+**Add a network interface**
 {{:iaas:pasted:20200526-113243.png}}
+**Select the network**
+You have the choose to use :
+   * private network : in this case the vm will be accessible from the unige network or vpn but it's more secure.
+   * public network : with this configuration the VM is accessible directly form internet without any security. You will need to setup the firewall and take care of security.
 {{:iaas:pasted:20200526-113250.png}}
+Add only one interface ! don’t press again on “+Network Interface”
+**Select the storage :**
 {{:iaas:pasted:20200526-113257.png}}
+**Go back to the top and click on create**
 {{:iaas:pasted:20200526-113306.png}}
+**Wait a couple of minutes, until the status is "running"**
 {{:iaas:pasted:20200526-113313.png}}
+**Now you can connect to the vm. Using the IP shown on the interface :**
 {{:iaas:pasted:20200526-113322.png}}
-Then you can login with your ssh private key
+**Then you can login with your ssh private key**
 If you need information on how to use your private key. You can follow the documentation : [[iaas:useprivateKey|use private ssh key on windows]]
 {{:iaas:pasted:20200526-113330.png}}